1­-855­-778­-7246
> > > SANIMP

Data ONTAP SAN Implementation (SANIMP)

 

Course Content

In this workshop course, you learn how to connect Windows® and Linux® hosts to NetApp® SANs via FC and iSCSI protocols. Course includes ONTAP 9.1 new features addendum.

Who should attend

Professionals who implement SAN solutions that use NetApp storage systems

Prerequisites

Course Objectives

By the end of this course you should be able to:
  • Define and describe SANs that use FC, FCoE, and iSCSI protocols
  • Configure Windows Server 2012 R2, Red Hat® 6.5, and Data ONTAP® systems for iSCSI connectivity
  • Configure Windows Server 2012 R2, Red Hat 6.5, and Data ONTAP systems for FC and FCoE connectivity
  • Use FC and iSCSI protocols to create and access LUNs from Windows Server 2012 and Red Hat 6.5 systems
  • Create and access a LUN from Windows Server 2012 and Red Hat 6.5
  • Size, clone, copy, move, back up, and recover LUNs on Windows Server 2012 R2 and Red Hat 6.5 systems
  • Troubleshoot SAN connectivity and performance issues
  • ONTAP 9.1 new features

Follow On Courses

Outline: Data ONTAP SAN Implementation (SANIMP)

Module 1: SAN Concepts
  • NetApp SAN
  • SAN Protocols
  • SAN Terminology
  • Implementing SAN
  • Designing and Planning a SAN Solution
Module 2: IP SAN Architecture
  • IP SAN Architecture
  • iSCSI Protocol
  • Implementing IP SAN on Data ONTAP
  • Scaling IP SAN In clustered Data ONTAP
Module 3: Windows IP Connectivity
  • Windows iSCSI Configuration
  • Windows iSCSI Implementation
Module 4: Windows LUN
  • LUN Access Overview
  • Windows Setup
  • Volume Management
  • SnapDrive for Windows
Module 5: Linux IP Connectivity
  • Linux iSCSI Configuration
Module 6: Linux LUN
  • LUN Access Review
  • Linux Setup
  • Volume Management
Module 7: FC SAN Architecture
  • FC SAN Architecture
  • FC SAN Connections
  • FC Protocol
Module 8: FC SAN Fabrics
  • Fabric Design
  • FC Initialization
  • Switch Concepts
  • FC Zoning
  • Scaling FC SAN in clustered Data ONTAP
Module 9: Windows FC Connectivity
  • Windows FC Connectivity
  • Data ONTAP 7-Mode CF Modes
  • Windows Configuration
  • Discovery and Provisioning
Module 10: Unified Connect
  • Unified Connect
  • FCoE-Enabling Technologies
  • End-to-End FCoE Configuration
  • FC-to-FCoE Connectivity
Module 11: Linux FC
  • Linux FC Configuration
  • SnapDrive for Unix
Module 12: LUN Provisioning
  • LUN Provisioning
  • LUN Overwrite Reservations
  • SAN Provisioning Options
  • HOST-Side Space Management
  • Keeping LUNs Online
Module 13: Host Considerations
  • Common Disk Structures
  • Multipathing
  • Clustered Data ONTAP Path Changes
  • Selective LUN Mapping in Clustered Data ONTAP 8.3
  • Queue Depth
Module 14: SAN Management
  • Port and Logical Interface Management
  • LUN Management
  • LUN Mobility
  • Copy Offload
  • LUN Cloning
  • Protecting a LUN
  • Removing a LUN
Module 15: SAN Troubleshooting
  • SAN Troubleshooting
  • Data ONTAP Troubleshooting
  • NetApp Data Center Tools

Appendix A: Windows Miscellaneous

  • Windows Server 2012 CLI
  • Windows Server 2012 Server Core
  • Dynamic disks

Appendix B: Brocade Configuration

  • Fabric OS
  • Management IP address configuration
  • Setting configuration
  • Zone configuration

Appendix C: Cisco Configuration

  • NX-OS
  • Initial configuration
  • Port configuration
  • Zone configuration

Appendix D: Scalable SAN Failover

  • SAN architecture
  • SAN operations
  • CLAM quorum
  • Epsilon administration

Appendix E: SAN Migration

  • Foreign LUN import

New Features Addendum: ONTAP 9.1

  • ONTAP 9 introduction
  • ONTAP 9.1 highlights
  • 12-node SAN clusters
  • Simply anywhere
  • OTNAP select
  • OnCommand management portfolio
  • SAN management enhancements
  • All Flash FAS
  • SnapCenter 2.0
  • 9.1 hardware refresh
Labs
  • Verify the cluster from the CLI
  • Verify the cluster from OnCommand System Manager
  • Use the NetApp OnCommand System Manager to create a data aggregate
  • Use the NetApp OnCommand System Manager to create a subnet for an SVM
  • Use the NetApp OnCommand System Manager to create an SVM for iSCSI
  • Set up Multipath I/O on Microsoft Windows Server 2012 R2
  • Install the host utilities kit on Microsoft Windows Server 2012 R2
  • Configure iSCSI sessions on Microsoft Windows Server 2012 R2
  • Confirm iSCSI sessions on the data ONTAP operating system
  • Create a local administrative account for NetApp software
  • Install NetApp SnapDrive for Windows on Microsoft Windows Server 2012
  • Create a Window iSCSI disk with SnapDrive for Windows
  • Verify the Linux configuration
  • Install the NetApp Linux host utilities on your Linux system
  • Configure the iSCSI software initiator for Linux
  • Confirm the iSCSI connections
  • Enable the Linux native multipathing
  • Create iSCSI-attached LUNs for Linux
  • Discover iSCSI-attached LUNs for Linux
  • Prepare an individual LUN and mount it on Linux
  • Configure an LVM2 logical volume
  • Review key FC concepts
  • Investigate the initial switch configuration
  • Configure FC HBAs on a storage system
  • Configure an SVM for FC connectivity
  • Install QLogic FC tool on Windows 2012 R2 system
  • Enable FC HBA ports on a Windows 2012 R2 system
  • Assign aliases to WWPNs on a storage system
  • Provide LUN access by using the CLI
  • Create a Windows volume by using FC-attached NetApp LUNs
  • Create a VLAN on the switch
  • Configure a target FCoE port on the switch
  • Configure an initiator FC port on the switch
  • Set up one-to-one zone mapping between the initiator and target port
  • Install SnapDrive for Linux
  • Create a LUN by using SnapDrive for Linux
  • Use SnapDrive for Unix to recover data
  • Create an FC-attached LUN with system manager
  • Create a Snapshot copy of a LUN
  • Observe the effects of writing to a LUN
  • Observe the effects of deleting data from a LUN
  • Observe the effects of overwriting to a LUN
  • Observe the effects of setting a Snapshot automatic deletion policy
  • Review the key host considerations
  • Examine FC HBA port configuration
  • Expand and shrink a LUN
  • Clone a LUN for Windows
  • Copy and move a LUN
  • Remove a LUN from Windows
  • Reset the storage HBAS to initiator mode
  • Download nSANity
  • Examine nSANity commands
  • Collect system data
  • Viewing nSANity files
Classroom Training

Duration 3 days

Price
  • Canada: CAD 3,780
  • NetApp Training Units: 36 NTU
    NTU's may not have the same redemption value if used in a country other than where they were purchased.
Dates and Booking
Online Training

Duration 3 days

Price
  • Canada: CAD 3,780
  • NetApp Training Units: 36 NTU
    NTU's may not have the same redemption value if used in a country other than where they were purchased.
Dates and Booking
 
Click on town name to book Schedule
This is an Instructor-Led Classroom course
This computer icon in the schedule indicates that this date/time will be conducted as Instructor-Led Online Training.
This is a FLEX course, which is delivered both virtually and in the classroom.
Date on request
Location on request
Canada

Currently there are no training dates scheduled for this course.  For enquiries please write to info@fastlaneca.com.

United States
 Dec 4-6, 2019 Online Training 09:00 US/Pacific Enroll

Fast Lane Flex™ Classroom If you can't find a suitable date, don't forget to check our world-wide FLEX™ training schedule.

Europe
Germany
Oct 14-16, 2019 Düsseldorf Enroll
Nov 11-13, 2019 Münster Enroll
Dec 16-18, 2019 Stuttgart Enroll
Jan 20-22, 2020 Hamburg Enroll
Feb 17-19, 2020 Munich Enroll
Mar 9-11, 2020 Frankfurt Enroll
Apr 20-22, 2020 Berlin Enroll
May 11-13, 2020 Düsseldorf Enroll
Jun 15-17, 2020 Stuttgart Enroll
Jul 6-8, 2020 Munich Enroll
Click Here to See All Dates
Austria
Oct 14-16, 2019 Vienna (iTLS) Enroll
Feb 17-19, 2020 Vienna (iTLS) Enroll
Jul 6-8, 2020 Vienna (iTLS) Enroll
Belgium
Dec 16-18, 2019 Brussels Course language: English Enroll
Dec 16-18, 2019 Brussels Course language: English Enroll
Bulgaria
 Oct 21-23, 2019 This is a FLEX event Sofia Course language: English Enroll
Online Training Time zone: Europe/Sofia Enroll
France
Oct 14-16, 2019 Paris Enroll
Dec 16-18, 2019 Paris Enroll
May 4-6, 2020 Paris Enroll
Sep 7-9, 2020 Paris Enroll
Italy
Oct 28-30, 2019 Rome Enroll
Feb 24-26, 2020 Milan Enroll
Jun 3-5, 2020 Rome Enroll
Sep 14-16, 2020 Milan Enroll
Nov 9-11, 2020 Rome Enroll
Netherlands
Oct 14-16, 2019 Utrecht Course language: English Enroll
Portugal
Dec 11-13, 2019 Lisbon Enroll
Slovenia
 Sep 30-Oct 2, 2019 This is a FLEX event Ljubljana Course language: English Enroll
Online Training Time zone: Europe/Ljubljana Enroll
Spain
Dec 18-20, 2019 Madrid Enroll
Switzerland
Dec 16-18, 2019 Zurich Enroll
United Kingdom
 Nov 20-22, 2019 This is a FLEX event London, City Enroll
Online Training Time zone: Europe/London Enroll
Feb 12-14, 2020 This is a FLEX event London, City Enroll
Online Training Time zone: Europe/London Enroll
May 20-22, 2020 This is a FLEX event London, City Enroll
Online Training Time zone: Europe/London Enroll
Latin America
Brazil
 Nov 25-27, 2019 Online Training Time zone: America/Sao_Paulo Enroll
Asia Pacific
Australia
 Sep 23-25, 2019 This is a FLEX event Sydney Enroll
Online Training Time zone: Australia/Sydney Enroll
Oct 28-30, 2019 This is a FLEX event Melbourne Enroll
Online Training Time zone: Australia/Melbourne Enroll
Dec 2-4, 2019 This is a FLEX event Sydney Enroll
Online Training Time zone: Australia/Sydney Enroll
Middle East
Israel
 Nov 24-26, 2019 This is a FLEX event Tel Aviv US$ 1,350 Enroll
Online Training Time zone: Asia/Jerusalem Enroll
Africa
Egypt
Mar 29-31, 2020 Cairo Course language: English Enroll
Oct 18-20, 2020 Cairo Course language: English Enroll